FV First-Aid Kit
Most of those small
accessories you need for your drive train miscellaneous hardware kit.
In a nice storage box. This package will save you at least one lost session a
season.
| Item | Use | Misc |
Qty |
| M6 x 1 (10mm wrench) | Intake, Sump | Yellow Zinc Plate | 12 |
| M7 x 1 (11mm wrench) | Transaxle | Yellow Zinc Plate | 6 |
| M8 x 1.25 (13 mm wrench) | Trans, engine and more | Yellow Zinc Plate | 12 |
| M8 x 1.25 (14mm wrench) | Head studs (8mm) | Black | 5 |
| M10 x 1.5 (15mm wrench) | Head studs (10mm) and engine mounts, etc. | Zinc Plate | 8 |
| M6 x 1 Nyloc | Intake sump | Zinc Plate | 12 |
| M8 x 1.25 Nyloc | Misc. Engine | Zinc Plate | 12 |
| M8 x 1.25 Bolts | 80mm and 100mm | Plated | 2 |
| 6mm Lock washers (inside) | Intake Manifold | Zinc Plate | 12 |
| 8mm Wavy washers | Engine, trans etc. | Zinc Plate | 24 |
| 8mm thick washers | Head Stud | 8 | |
| 12mm thick washers | Case halves, misc. drive train | Zinc plate | 6 |
| 8mm (12mm wrench) | Exhaust nuts | Copper plated | 8 |
| Studs, 8mm | Head stud. (1 Long and 1 short) | cut to size | 2 |
| Studs, 8mm (Assorted) | Carb, Oil block, Heads etc. | Zinc Plate | 2 |
| M8 x 1.25 Bolt | Engine Case, etc. 100mm and 80mm | Zinc Plate | 2 |
| Seal Copper | Intake Manifold | Solid Copper | 2 |
| Ignition Point Set | Black/White wire set | 1 | |
| Condenser and wire set | 1 | ||
| Sparkplugs | W5BC | 4 | |
| Rocker Tip Adjuster | w/ lock nut | 2 | |
| Rocker Shaft Clips | 2 | ||
| Gasket | 30 PCIT Carb/Intake | 1 | |
| Switch (New, Not Shown) | On/Off Toggle Sw. (Ign, Rain, etc) | 1 | |
| Case | Plano adjustable storage case | 1 |
In a nice storage case. All for $49.95
