Hardware and Chassis Parts

Description	RCS Part #	Info	Price
Dzus (Captive, Flat top) .40 length*	EHF5-40	Captive Dzus	$1.88
Dzus (Captive, Flat top) .45 length)*	EHF5-450	Captive Dzus	$1.95
Dzus (Captive, Flat top)  .50 length*	EHF5-50	Captive Dzus	$1.95
Dzus (Captive, Flat top)  .55 length*	EHF5-550	Captive Dzus	$1.95
Dzus (Captive, Flat top)  .60 length*	EHF5-60	Captive Dzus	$1.95
Dzus Spring	S5-225		$. 49
Weld Plate w/o spring	DZU-PLATE		$ .90
Weld Plate w/ spring	X945-285		$1.49

*Dzus Length is measured from the top (flat) of the slotted end to the center of the spring lock hole on the shaft.

Description	RCS Part #	Info	Price
Steering Wheel Momo Cut-D	MOM-250C	Suede Covered 250mm across.	$189
Steering Wheel Grant D	GRT-713-4	Suede Covered 250mm across ~229mm top to bottom	$119.95
Steering Wheel Disc. Hex 5/8, Pin	SFQ-STD-PIN58	Single Push Pin Release 5/8" Shaft	$29.00
Steering Wheel Disc. Hex 3/4, Pin	SFQ-STD-PIN34	Single Push Pin Release 3/4" Shaft	$29.00
Steering Wheel Disc. Hex 5/8, Ring (Photo2)	SFQ-STD-HEX58	360 deg. Ring Release 5/8" Shaft	$35.95
Steering Wheel Disc. Hex 3/4, Ring (Photo2)	SFQ-STD-HEX34	360 deg. Ring Release 3/4" Shaft	$35.95
Steering Wheel Disc. Splined 5/8 Pin	SFQ-STD-SPL58P	Push Pin Release with Splined Shaft. Less "wiggle" 5/8" Shaft	$38.48
Steering Wheel Disc. Splined 3/4 Pin	SFQ-STD-SPL34P	Push Pin Release with Splined Shaft. Less "wiggle" 3/4" Shaft	$38.48
Steering Wheel Disc. Splined 5/8 Ring (Photo2)	SFQ-STD-SPL58	Top of the line. 360 deg ring and splined shaft. 5/8"	$59
Steering Wheel Disc. Splined 3/4 Ring (Photo2)	SFQ-STD-SPL34	Top of the line. 360 deg ring and splined shaft. 3/4"	$59

U-Joints

APX MIL SPEC U-JOINT 1/2"	APX-MS-20271-B10	High Quality Rubber Covered U-Joint	$79.59
APX MIL SPEC U-JOINT 5/8"	APX-MS-20271-B12	High Quality Rubber Covered U-Joint	$85.95
APX MIL SPEC U-JOINT 3/4"	APX-MS-20271-B14	High Quality Rubber Covered U-Joint	$89.95

Description	RCS Part #	Info	Price
Pedal Assm. (2 Pedal Steel Anodized Black)	TIL-72-642	Great bolt in Formula Car Pedal Assm. w/bias bar and clevis's. Non-slip pedal coating.  See PDF for Specs. Master Cylinders not included.	$215.99

Description	RCS Part #	Info	Price
Steering Shaft Dash Pivot / Mount 5/8"	TRI-FMN10	Great dash steering column support.	$2.49
Steering Shaft Dash Pivot / Mount 3/4"	TRI-FMN12	Great dash steering column support.	$2.49

Economy Aurora Rod Ends.   
The following Rod Ends are Carbon Steel and protective coated. Ball is Sintered steel, heat treated and oil impregnated .

Description	RCS Part #	Info	Radial Load Rating lbs	Price
Heim Joint (Rod End)	AUR-CM4	1/4 " Eye and Shank Right Hand Thread	2200	$5.31
Heim Joint (Rod End)	AUR-CB4	1/4 " Eye and Shank Left Hand Thread	2200	$5.52
Heim Joint (Rod End)	AUR-CM5	5/16 " Eye and Shank Right Hand Thread	3557	$5.84
Heim Joint (Rod End)	AUR-CB5	5/16" Eye and Shank Left Hand Thread	3557	$6.05
Heim Joint (Rod End)	AUR-CM6	3/8" Eye and Shank Right Hand Thread	5068	$6.66
Heim Joint (Rod End)	AUR-CB6	3/8 " Eye and Shank Left Hand Thread	5068	$6.87
Heim Joint (Rod End)	AUR-CM7	7/16" Eye and Shank Right Hand Thread	6345	$7.88
Heim Joint (Rod End)	AUR-CB7	7/16" Eye and Shank Left Hand Thread	6345	$8.09
Heim Joint (Rod End)	AUR-CM8	1/2" Eye and Shank Right Hand Thread	8338	$10.69
Heim Joint (Rod End)	AUR-CB8	1/2" Eye and Shank Left Hand Thread	8338	$10.90
Heim Joint (Rod End)	AUR-CM10	5/8" Eye and Shank Right Hand Thread	9713	$14.62
Heim Joint (Rod End)	AUR-CB10	5/8" Eye and Shank Left Hand Thread	9713	$14.83
Heim Joint (Rod End)	AUR-CM12	3/4" Eye and Shank Right Hand Thread	14207	$19.19
Heim Joint (Rod End)	AUR-CB12	3/4" Eye and Shank Left Hand Thread	14207	$20.20

Many More Rod Ends are in stock. Call us about application if unsure.