I/O Port Camera Mount. 3 axis Pivot. Best for Larger cars. (Not small Formula Cars)

(Note: These mounts are for standard Video cameras with a 1/4-20 stud mount. The Hero Camera Kits below do not use these types of mount.)

SafeQuip Billet Camera Mount. 2 axis adjustable. (3rd axis adjusted by positioning on roll bar)

(Note: These mounts are for standard Video cameras with a 1/4-20 stud mount. The Hero Camera Kits below do not use these types of mount.)

Great for Race Cars... (or any sport activity. Scuba, Skydiving, etc.)
Waterproof, easy 2 button operation. 1.25 x 1.75 x 2.6".
4.5 oz. Very easy and safe mounting. Comes with all you need except a PC for viewing.
(Can also be viewed on your TV. Video and USB Cables provided.)
Comes with all the options you would need for mounting on the Windshield, your Helmet, or most any other surface you want.

3 Megapixel (2048 x 1536) (See the newer version 5 Megapixel Wide Angle Version below)

16 MB Base (expandable with SD card to 2GB)
640 x 480 (54 Minutes) w/ 2GB SD Card)
USB / RCA TV Cable
2 AAA Batteries (included)

Start before the session and record up to 54 minutes of video and sound. Then just download to your PC (WIN ME/2000/XP) or playback directly to your TV.

These are the units we rent with our Rental Cars. Full TV Resolution with sound. View a sample Here. (3 Meg)

The video above was made with a FST Race Car. The camera was installed on the front suspension, video made and downloaded, all in under 10 Minutes. This is a gotta have unit.

Base Camera with 16MB Still Photos or 30+ Seconds of Video) Only) ~~$175.95~~ $159.95 Closeout Sale!

2 GB SD Card (Adds 54 Minutes of Audio and Video $ 22.95

Similar to above, but now with Wide Angle lens, 5 MegaPixel camera and improved features. Uses same 2Gig SD card, but is upgradeable to a 4Gig card. (2q09).

The Ride HERO is a seatpost and handlebar tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 0.75" to 1.4" (1.9cm - 3.5cm) in diameter.

You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kitesurfing booms/control bars, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

This unit only mounts to the MotorSports case versions. (Not the Velcro Wrist type)

Roll bar/tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 1.4" to 2.5" (3.5cm - 6.35cm) in diameter.

Perfect for clamping your camera to the radiator cap (both metal and plastic caps) on karts.

You can also clamp to bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

This unit only mounts to the MotorSports case versions. (Not the Velcro Wrist type)

$19.95

$29.95

WITH 5-POINT HARNESS
Booster car seat is secured with vehicle seat belt threaded thru back of car seat; child is secured by 5-point harness system

FOR CHILDREN 20-40 LBS.
when used with 5-point harness: this restraint is certified for use in aircraft

WITH VEHICLE COMBINATION LAP/SHOULDER BELT
Booster car seat elevates child so vehicle combination lap/shoulder belt is positioned comfortably and securely

FOR CHILDREN 30-100 LBS.
when used without the 5-point harness as a belt positioning seat: this restraint is not certified for use in aircraft

Meets or exceeds all applicable motor vehicle safety standards.

Seat pad features a racing inspired flame pattern with Simpson 'S' logo and 'Jr. Racer' logo.
E.P.S. energy absorbing foam.
Padded arm rests for extra comfort.
One-hand adjustable head support grows with your child.
Open loop belt guide for easy installation and added comfort.
Deep side wings support your child while napping.
Easily converts to a backless booster seat.
Hide-away cup and snack holders for when you are on the go.