ATL and Fuel Safe FIA Cells

(Cells and dimensions of the common Formula Car cells that we stock will be shown here. However we can take care of all your cell needs.)

FIA Fuel cells can be very expensive and if you need a custom cell to fit your car it will often add 50% to the price of the cell.  Check here to see if you can get an "off the shelf" cell to fit. Be sure and check with your sanctioning body as to its requirements.

Some important info on the care and feeding of your cell:

1. When storing for long periods (months), you should either make sure the cell is either filled with fuel and sealed, or completely empty and dried.

2. Do not use anything other than the recommended fuels.  No Ethanol greater than 10%.

3. Make sure your cell is isolated from the floor of your car where small stones and grit can accumulate. These can abrade your cell or puncture it.  

Shown here are cell that we usually stock and/or are a couple days away from shipment. These are typical FV or FST Cells. We are ATL and Fuel Safe retailers, so we can usually  get you any cell in a couple days. Custom cells usually take up to 6 to 8 business days. 

CELL	Dimensions A x B x C x D	Vent / Pick-up	Gal	Our Price
ATLFC-140	4.0 x 8.0 x 11.0 x 15.0	#6AN / #6AN	4	$525
ATLFC-150	4.0 x 9.0 x 15.0 x 16.0	#6AN / #6AN	5	$555
ATLFC-152	4.0 x 9.0 x 17.0 x 14.0	#6AN / #6AN	5	$575
FUELSAFE CB-301	Dimensions	#6AN / #6AN	5	$555
FUELSAFE CB-400	Dimensions	#6AN / #6AN	4	$340

Due to lack of manufacture competition and oil prices etc. prices can fluctuate rapidly. We will notify you in the event of price changes.

Note: For a FV (1200cc) a 4 Gallon Cell will be adequate for a normal SCCA race.  For a FST or 1600, a 5 Gallon cell will be the preference.

For SCCA racing (wheel to wheel) you also require a aluminum housing. See the GCR. We can also make these up for you.

We also can get you the full selection of other ATL and Fuel Safe Cells and good pricing.

Please call with questions.  (859-252-2496)